Today we will introduce to you three situations of renovating marble floors:
Minor marble renovation
If the surface of the stone is slightly scratched, you can use a light renovation process to renovate it.
If there is old wax on the floor, remove the wax first, and then polish it with water for ten minutes.
Note: Add water during the polishing process to keep the ground moist, and use water-absorbing The machine sucks away the sewage to prevent the sewage from contaminating the ground for the second time. Then replace the polishing disc and diamond water-grinding disc, and polish them one by one using the above method. After the renovation process is completed, wash it with clean water and absorb the water on the surface of the stone. Light marble renovation completed.
Medium renovation of marble
When the stone surface is tarnished and can not reflect the object at all without too deep scratches, a moderate renovation process can be used for renovation.
Polish the polished sheet and diamond grinding polishing pads one by one, and the precautions for polishing method are the same as above.
Deep renovation of marble
When holes, weathering, severe corrosion, complete loss of luster and deep scratches appear on the surface of the stone, a deep renovation process can be used for renovation. Before renovation, the holes must be repaired. The method is as follows: First clean the dirt in the holes. Clean and dry the stone. Use imported epoxy resin glue or unsaturated resin glue according to the color and reflective characteristics of the original stone. After coloring, repair it. Use a weighting machine, a refurbished disc and polished diamond. Use wet diamond polishing discs to polish one by one. The precautions for the polishing method are the same as those for light renovation.
Email: alice@jingdaexport.com
Tel:008615100134172
Add:
Zhongshan Road No.20, Chang'an District, Shijiazhuang City, Hebei Province, China.